Uses:
AllKleen is an all-purpose solvent-based surface cleaner. It dissolves and removes waxes, oils, solvent and water based releases, styrene buildup, and most other surface contaminants.
Application:
Apply a liberal amount of AllKleen to a 100% cotton applicator cloth. Work into surface in a circular motion and let stand 3-5 minutes. This wait time allows the cleaner to dissolve and lift out contaminants from surface pores. Using a fresh cloth, buff surface clean- changing cloths frequently to avoid cross-contamination. Repeat until no further contaminants are seen on buffing cloth.
Application Tips:
Kadko, Inc. 01/05/06
P.O. Box 722
205 Bethel Ave.
Beech Grove , IN 46107
Tel: 317-788-0284 Fax: 317-788-0304
Product Code: 072595A
Section I- Nomenclature:
Chemical Name and Synonyms: Solvent-Resin Blend
Trade Name and Synonyms: KadKlad AllKleen
Chemical Family: Polymeric Resin-Solvent Blend
Formula: Blend
Section II Hazardous Ingredients 7 Section 313 Supplier Information:
If a hazardous ingredient is identified as a toxic chemical via hazard code "A" that chemical is subject to the reporting requirements of section 313 of the emergency planning and community right to know act of 1986 and of 40CRF372.
Hazard Codes (HAZD):
C=Carcinogen
H= Hazardous (OSHA)
A= Superfund Amendments and Reauthorization Act (SARA)
| Hazardous Material | % by Wt. | TLV Meas. | PEL Meas. | CAS NBR | HAZD |
Isoparaffnic |
50-60% | 400ppm* | 64741-66-8 | H | |
| Aliphatic Hydrocarbon | 5-10% | 300ppm | 64742-47-8 | H | |
D-Limonene |
1-5% | N/A | 5989-27-5 |
Section III Physical Data:
Boiling Point (Deg.F) UNK Specific Gravity 0.79 (H 2 0=1)
Vapor Pressure (mm hg) UNK
Vapor Density (Air=1) >1
Solubility in water- Insoluble in water
Appearance and odor- Colorless, Mild Hydrocarbon odor.
Manufacturer Recommendation*
Section IV-Fire Explosion Hazard Data:
Flash Point (Deg.F) 107 ° F Method Used-TCC
Lower Explosion Level Unknown Upper explosion level- Unknown
Extinguishing Media:
Powder or foam recommended
Special Fire Fighting Procedures:
Self contained breathing apparatus and protective clothing should be worn in fighting fires involving chemicals;
Unusual Fire and Explosion Hazards:
None
Section V-Health Hazard Data:
Threshold limit value-See section II
Effects of overexposure:
May irritate eyes, skin, and mucous membrane of the respiratory tract. Exposure to very high concentrations may cause sensitization of the myocardium and may aggravate impaired cardiovascular functions. Excessive exposure may damage kidneys and liver. Anesthesia, nausea, dizziness.
* As recommended by the manufacture, similar chemicals can cause these effects.
Emergency and First Aid Procedures:
Inhalation-Remove to fresh air
Eyes Contact-Flush with water
Skin Contact-Wash with soap and water
Ingestion- Call a Physician.
Section VI- Reactivity Data:
Stability- Stable
Conditions to avoid-none
Incompatibility (Materials to avoid):
Oxidizing materials can cause a reaction
Hazardous Decomposition Products:
Carbon dioxide, carbon monoxide, fumes and smoke in case of incomplete combustion.
Hazardous Polymerization:
Will not occur.
Section VII- Special Protection Information:
Eye Protection:
Goggles, in case of spillage
Other Protective Equipment:
Use impervious clothing if necessary to avoid prolong skin contact.
Section VIII- Special precautions:
Precautions to be taken in storage and handling Avoid open flames and sparks. Keep container closed tightly to avoid hydrolysis of product by moisture. Storage should be in compliance with NFTA and OSHA 29CRF1910.106 And 107
Other Precautions:
None
HMIS Rating:
Health Hazard: 1
Flammability: 3
Reactivity: 0
Hazard Rating:
0 = Least
1 = Slight
2 = Moderate
3 = High
4 = Extreme
All INFORMATION AND RECOMMENDATIONS PROVIDED IN THIS MSDS, ARE CORRECT TO THE BEST OF OUR KNOWLEDGE AND ACCURATE AT THE DATE OF THE PUBLICATION.
NOTHING HEREIN IS TO BE CONSTRUED AS A WARRANTY. IT IS THE RESPONSIBILITY OF THE FINAL END USER TO DETERMINE THE APPLICABILITY OF SUCH INFORMATION OR THE SUITABILITY OF ANY PRODUCT FOR HIS OR HER OWN PARTICULAR PURPOSE.