P.S.F protective coatings for aircraft, marine vessels and all types of land vehicles have the following properties and economical advantages:
The Silazane resins have been used worldwide for decades to prevent adhesion in the construction of military and commercial aircraft as well as many vehicles used for the space program.
The technical staff at KADKO, INC. developed the engineering techniques for the production and utilization of these resins. After many years of additional research and development, KADKO, INC. has made them economical and easy to use for the protection of vehicles against wear and weather .
Surface Preparation:
Surface should be free of dirt, wax, oils, or any other foreign material. We suggest using Simple Green or Castrol Purple Stuff to remove any wax from the surface. Apply P.S.F. only to a cool dry surface out of direct sunlight and windy conditions.
Direction for use:
Apply a liberal amount of material to a clean dry white 100% cotton cloth. Coat an area of convenient size (Approx. 2-3 sq. ft) and let material stand for 15-20 Min. Buff with a clean, dry, 100% cotton cloth to high gloss. Rewet applicator cloth every time you start a new area. Overlap slightly as each new section is done. Continue in this fashion until entire surface has been coated. We do recommend two applications to give you maximum durability, and ensure that any areas inadvertently missed are coated. The applied P.S.F. film will become chemically insoluble in twelve hours.
Caution:
Flammable Material- Keep away from sparks and flames: use in a well-ventilated area.
Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal.
Note : This product is a surface (finish) protector, if higher gloss is desired; we recommend using 3M Finesse-it Part No -05928 or similar finishing compound that does not contain wax or silicones before applying P.S.F. This will cut any oxidation if needed and maximize the surface gloss.
Revision Date: 12/20/07
Kadko Incorporated
P.O. Box 722
Beech Grove, IN 46107
Tel: 317-788-0284
Fax: 317-788-0304
24-Hour Emergency Contact: CHEMTREC 1-800-424-9300
SECTION I- Chemical Identification |
Product Name: |
P.S.F. Polymeric Silazane Finish |
Proper Shipping Name: |
Resin Solution |
|
Item Number: |
093098B |
DOT Hazard Class: |
3 |
|
Chemical Family: |
Polymeric Resin-Solvent Blend |
DOT Packing Group: |
II |
|
Formula: |
Blend |
DOT Identification Number: |
UN1866 |
SECTION II- Composition/Information on Ingredients |
Hazardous Material |
% by Wt. |
ACGIH TLV |
OSHA PEL |
CAS NBR |
HAZD |
Amyl Acetate |
20-30% |
100ppm* |
628-63-7 |
H |
|
Isoparaffinic Hydrocarbon |
55-65% |
300ppm |
64742-48-9 |
H |
|
Paraffinic Hydrocarbon |
5-10% |
140ppm. |
64771-72-8 |
||
Glycol Ether |
1-5% |
N/A | 143-24-8 |
Hazard Codes [HAZD]
C = Carcinogen
H = Hazardous [OSHA]
A = Superfund Amendments and Reauthorization Act [SARA]
If a hazardous ingredient is identified as a toxic chemical via hazard code “A,” that chemical is subject to the reporting requirements of section 313 of CERCLA/SARA and of 40 CRF 372.
This product contains no chemicals subject to the reporting requirements of SARA 313 and 40 CFR 372
*Manufacturer’s Recommendation
SECTION III- Physical and Chemical Properties |
Appearance: |
Colorless Liquid |
Odor: |
Mild Hydrocarbon |
Boiling Point [°F]: |
N.E. |
Vapor Pressure [mm HG]: |
N.E. |
Vapor Density [Air = 1]: |
>1 |
Solubility in water: |
Insoluble |
Evaporation Rate [BuAc = 1]: |
N.E. |
Specific Gravity [H20 = 1]: |
.79 |
SECTION IV- Fire Explosion Hazard Data |
Flash Point: 107° F / TCC Method
Upper/ Lower Explosion Limit: Not Available
Extinguishing Media: Foam or dry chemical.
Special Fire Fighting Procedures: Self contained breathing apparatus and full protective clothing should be worn. Water spray may be used to disperse vapors and to keep containers exposed to fire cool.
Unusual Fire/Explosion Hazards: Containers exposed to fire may develop a buildup of interior vapor pressure resulting in container rupture. Vapors are heavier than air and may accumulate in low areas. Water spray may be used to disperse vapors and to keep containers exposed to fire cool.
NFPA [National Fire Protection Association] Ratings:
Health Hazard |
1 |
Exposure may cause irritation but only minor residual injury even if no treatment is given. |
Flammability |
3 |
Liquids and solids that can be ignited under almost all ambient conditions. |
Instability |
1 |
Normally stable, but can become unstable at elevated temperatures and pressures. |
SECTION V- Stability and Reactivity Data |
Stability: Stable
Decomposition Products: Combustion may yield carbon dioxide/monoxide, fumes, smoke.
Hazardous Polymerization: Will not occur.
Incompatibility: Oxidizing Agents may cause a reaction
Conditions to Avoid: All sources of ignition such as heat, flames, spark. High temperatures
SECTION VI- Health Hazards Identification |
Probable Routes of Entry: Skin, Inhalation, Eyes
Potential Health Effects:
Inhalation |
Vapors and mists may cause irritation of the mucous membrane of the respiratory tract, dizziness, and headache. |
Skin Contact |
Prolonged contact may cause irritation or dermatitis. |
Eye Contact |
Mild irritation, redness, stinging. |
Ingestion |
May be harmful if swallowed. DO NOT induce vomiting. Seek medical attention immediately. |
Effects of Overexposure: Anesthesia, nausea, headache, dizziness. Exposure to very high concentrations may cause sensitization of the myocardium and may aggravate impaired cardiovascular functions. Excessive exposure may damage kidneys and liver.
Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling this product may be harmful or fatal.
SECTION VII- Emergency and First Aid Procedures |
Inhalation: Remove to fresh air. If symptoms persist, seek immediate medical attention. If not breathing immediately begin artificial respiration.
Eye Contact: Flush with plenty of water. If irritation or redness persists seek medical attention.
Skin Contact: Remove contaminated clothing and wash thoroughly with soap and water. If irritation or redness develops, seek medical attention.
Ingestion: DO NOT induce vomiting due to danger of aspiration. Seek immediate medical attention.
SECTION VIII- Special Protection Information |
Ventilation: Ensure adequate ventilation.
Respiratory Protection: If ventilation is inadequate use a NIOSH approved respirator
Eye/Face Protection: Safety glasses with side shields or chemical splash goggles are recommended.
Skin Protection: If necessary, use impervious clothing/equipment to avoid prolonged skin contact.
Hygienic Practices: Avoid prolonged contact with skin. Wash thoroughly after handling.
SECTION IX- Handling and Storage |
Storage: Store container away from heat, sparks, flames, and any other source of ignition. Keep container closed tightly to avoid hydrolysis of product by moisture. Storage should be in compliance with NFTA and OSHA 29CRF1910.106 and 29CRF1910.107
Handling: Keep away from heat, sparks, flames, and any other source of ignition. Avoid contact with eyes, skin and clothing.
SECTION X- Accidental Release Measures |
Precautions: Flammable material. For large spills, remove all sources of ignition. Vapors are heavier than air and may collect in low areas. Maintain good ventilation at all times. Use precaution and a NIOSH approved respirator if necessary. Do not allow material to contaminate groundwater.
Clean up Method: Soak up spill with inert absorbent material such as sand, sawdust, chemical binder or similar. Sweep up and dispose according to local, state, and federal regulations.
SECTION XI- Other Information |
All information and recommendations provided herein are for information purposes only and are believed to be reliable and accurate at the date of revision. Kadko Incorporated disclaims all warranties, express or implied, including warranties of merchantability and fitness for a particular purpose arising from the sale or use of any Kadko product. It is the responsibility of the user to ensure compliance with all applicable local, state, and federal regulations. It is the user’s responsibility to determine the suitability of any of Kadko’s products for any particular process or method and to take the necessary precautions to protect property and persons against any hazards presented by the use or handling of any Kadko product. Kadko Incorporated specifically disclaims any liability for consequential or incidental damages of any kind, including lost profits.